ROTOR CLEANER – AIR

Ostberg Rotor Cleaner is specially designed to fit the needs for smooth and efficient service mission of Rotary Energy Exchangers. The Rotor Cleaner need to be connected to a stationary high pressed air system and 220V power supply. Air and power supply is easily connected by the 15M long automatic Retractable hose and automatic Retractable cable.

Features of Ostberg Rotor Cleaner >>

All-in-1 Trolley.

Easy and fast startup of cleaning process.

Multiple hole nozzles, for repeated cleaning of the same cell during one cleaning cycle.

Slow motion-controlled stroke movement of the nozzle.

* High precision linear actuator with slow motion, motor drive.

PLC- controlled stroke length, easy set to requested stroke length.

* Twin- nozzle arm, reduce the cleaning time up to 50% (depending on diameter).

+ Maintained stroke length with shorter cylinder.

+ Lighter cylinder, easier to handle.

Dust collection tray, telescopic to fit a large range of rotor diameters (optional).

Quick- Click fastener for a fast and secure installation of the Screw actuator and collection tray “safe, fast & convenient”.

PLC-controlled cleaning

1. Program the requested cleaning stroke.

2. Set number of cleaning cycles.

3. Push START

* Total cleaning time is shown.

* Remaining cleaning time is displayed.

Its as Easy as That

Convenient and Smooth connections

4. 15 M Retractable Air host.

5. 15 M Retractable electrical host.

6. 7M air pipe collected on the trolley.

Transportation Seat for Screw actuator and Collection tray, for smooth relocation of equipment between the Air-handlers.

We Make Your Work Easy!

Power Supply

1 x 220V power supply on the trolley,

e.g., power supply to vacuum cleaner.

Every Detail Counts!

Accessories

Twin Nozzle

Features:

1. Utilize the whole Screw Actuator length for cleaning stroke.

2. Reduce cleaning time (in average) by 30%.

3. Shorter Screw Actuator, same cleaning stroke.

4. Lighter Screw Actuator, easier to handle.

DUST COLLECTION TRAY

Telescopic Dust Collection tray to be connected to a Vacuum cleaner.

The Dust Collection tray helps to collect the dust and prevents the needs of cleaning of the air-handler after finalized cleaning of the wheel/rotor.

The Dust Collection Tray is installed in the unit by using same type of Quick click’s as used for the Screw Actuator.

We recommend using a vacuum cleaner with “self-cleaning” filter function.
Please observe, if air- handler have different “floor level” on the opposite side of the wheel an additional telescopic fastener is needed to level the Dust Collection tray in correct level with the cleaning Nozzle.

Quick Click’s

The Quick Click’s shall be permanently installed in each air-handler this will ensure a correct, fast and safe installation at every cleaning process. The Quick Clicks are sold in a package of 10 pairs, please observe that when also Dust Collection Tray is used each air-handlers needs a set of 2 pair Quick Click’s.

ITEM Rotor cleaner standard Collection tray 734~1100mm – ① Collection tray 450~650mm – ② Quick click – ③ Nozzle – ④
2110000232
2110000045
2110000225
1660000003
2506000028

Dust Collection Tray is available in two lengths, 734~1100mm is suitable for rotor diameter and 750~2400mm.

450~650mm is suitable for rotor diameter 450~1500mm. Manufactured in SST 304.

1- pair Quick Click / item is requested, P/N 1660000003 contains 10 pair. Manufactured in SST 304.

Multi hole nozzle. Manufactured in SST.

Technical Data

Subject Data Unit
Air nozzle speed 30 mm/min
Cylinder stroke 750 mm
Voltage input 220-240/50/60 VAC/Hz
Power input 44 W
Max. air pressure 10 Bar
Control box working voltage 24 VDC
Control box current 1.8 A
Air nozzle hole diameter 1 mm
Power supply cable length 15 M
Weight 52 Kg